|
|
Post by henri on Mar 30, 2021 14:41:52 GMT
recently a guy fairly local to me decided to sell up , an i bought a parma engine in bits off him at a very reasonable price .  sporty 002 by henri briggs, on Flickr . then he decided to sell me the frame it came out of , an some other bits ,at a very very reasonable price .  sporty 003 by henri briggs, on Flickr . so a bit of a side project for me .  richard 002 by henri briggs, on Flickr . 1st thing ,get rid of the 90SS butty box ,useless thing , an get a MZ 6 day international trial tank to fit , suits the lines better ,an holds fuel . richard 002 by henri briggs, on Flickr. not going to have time or space to paint this one ,so sending it to a mate to paint ,in a suitably racey theme .H |
|
|
|
Post by tzsteve on Mar 31, 2021 15:54:32 GMT
frenched lights will look interesting.
dont forget you need a number plate light for the mot
|
|
|
|
Post by henri on Mar 10, 2022 13:32:57 GMT
|
|
|
|
Post by movin64 on Mar 10, 2022 19:28:10 GMT
Very nice 👍👍
|
|
|
|
Post by tzsteve on Mar 11, 2022 17:34:21 GMT
Nice paint job
And no horn?
|
|
|
|
Post by henri on Mar 12, 2022 8:39:48 GMT
a guy in barnsley , richard galloway at hobnob racepaints did it for me ,at a very attractive mates rates ,in return i refreshed a engine built by mark broadhurst for him . havent made my mind up yet about the horn , probably going full DC "wassel" type system so horn will be under the seat .an choose some emblem for the horncast .H
|
|
|
|
Post by tzsteve on Mar 12, 2022 11:15:13 GMT
Re the electrics
im using a 3 phase yam rectifier regulator from an LC
It can handle 250 watts and i just plug the two wires from my VMC stator into any of the inputs.
100% reliable and cheap as a second hand unit from fleabay
|
|
hrvespa
ETS
1981 50 special, 1977 primavera, 1964 GL 150, 1975 125 TS (early P200 engine)
Posts: 161
|
Post by hrvespa on Mar 13, 2022 9:31:52 GMT
Thats some mighty fine paint job!
Even better it was at 'mates rates'
That'll get heads turning once on the road.....😁
|
|
|
|
Post by henri on May 1, 2022 8:07:00 GMT
time to get started on this one now the better weathers here .  IMG_0779 (1) by henri briggs, on Flickr . so chose a seat , a rear hinge 90SS humpback seat .H |
|
Yoshi
100 Sport
Posts: 75 
|
Post by Yoshi on May 1, 2022 17:59:44 GMT
That paintjob looks pretty awesome!
|
|
|
|
Post by henri on May 17, 2022 8:19:47 GMT
 IMG_0866 by henri briggs, on Flickr . got some time on this one at last , other peoples scooters have been taking up my play time . floor runners an trim on ,number plate fitted , an seat chosen an gas lifter fettled to work .  IMG_0867 by henri briggs, on Flickr . an panel buffers fitted ,an panels checked for fit ,engine sides spot on , exhaust side needs a tiny fettle .H |
|
|
|
Post by tzsteve on May 17, 2022 8:29:33 GMT
I still like the paint job
|
|
|
|
Post by vinrouge on May 17, 2022 9:27:29 GMT
Quite a change in its appearance from the first photo, coming together and looking good. Are you having second thoughts about the tank?
|
|
|
|
Post by vinrouge on May 17, 2022 9:28:06 GMT
Quite a change in its appearance from the first photo, coming together and looking good. Are you having second thoughts about the tank?
|
|
|
|
Post by henri on May 17, 2022 16:09:16 GMT
no an no vin , an definetly NO . H
|
|
|
|
Post by tzsteve on May 17, 2022 16:37:45 GMT
I take it you mean NO!
|
|
|
|
Post by vinrouge on May 17, 2022 20:17:09 GMT
I’m pretty certain that’s a NO |
|
|
|
Post by henri on May 18, 2022 6:22:06 GMT
Quite a change in its appearance from the first photo, coming together and looking good. Are you having second thoughts about the tank? i just havent made the brackets up to fit the tank yet ,but its def having a centre tank fitted .H |
|
|
|
Post by henri on Jun 1, 2022 7:03:30 GMT
got the et4 forks converted an fitted .  IMG_0906 by henri briggs, on Flickr . went with a stage6 caliper bracket an 4 pot caliper an polini wavy disc .  IMG_0907 by henri briggs, on Flickr . an a lx 11" wheel , as in 10" theres only the ugly et2/4 wheel, the very rare zip SP , or very expensive polini zip SP ,an at £600 for a bare rim they can jog on .  IMG_0908 by henri briggs, on Flickr . then got on an made a main loom up an ran that an the cables , engine in nxt .H |
|
Yoshi
100 Sport
Posts: 75
|
Post by Yoshi on Jun 2, 2022 7:03:02 GMT
Damn that thing is narrow! It didn't occur to me in the previous pics as strongly.
What kind of an engine are you going to put in?
|
|
