|
Post by triffid on Aug 30, 2010 21:06:22 GMT
CC runs a standard ET3 with DR kit with matched casings, Simmonini down and forward pipe and 20mm dlli carb with Mallossi filter, standard flywheel. Put it on the dyno machine at IOW and it was putting out 8 1/2 bhp at about 7500-8000 rpm.
Nothing too startling but for little outlay gives you a nice increase in usable power.
|
|
|
Post by gioia on Aug 31, 2010 22:20:30 GMT
Good usable info, thanks for posting that up.
|
|
|
Post by smallframetony on Aug 12, 2012 20:08:38 GMT
suprised that a basic setup like that pulls 8 1/2 hp ! GREAT
|
|
|
Post by 2fastscoots on Aug 12, 2012 21:54:55 GMT
suprised that a basic setup like that pulls 8 1/2 hp ! GREAT I would hope to get at least a couple of horses with a new topend, exhaust,carb & airfilter albeit not the best upgrades. also et3 in standard trim makes (I think) 6HP at 6000RPM so seems realisticly in perspective in my eyes.
|
|
|
Post by smallframetony on Aug 12, 2012 22:12:17 GMT
Thats not bad for a standard motor 6hp haha. I want to get mine dynoed when i have bought everything for it, wont be untill the end of the year though :/
|
|