|
Post by breezer on Dec 2, 2007 22:21:33 GMT
Okay, I'm still a little confused about this... I've got a PK50 4 speed gearbox to go into V100 cases.
Do I use the pk50 output shaft or the V100 output shaft?
Or are all the output shafts the same?
Also I don't understand the difference between square & round cruciforms - can I use the cruciform from the PK? Are the cruciforms mated to the shaft or gears or cases?
Apologies for all the questions.
|
|
|
Post by Juan on Dec 2, 2007 22:26:08 GMT
Swap the PK 'box straight across Jim.
|
|
|
Post by hank on Dec 2, 2007 22:27:56 GMT
i think the shafts are all the same, but pk & v series cruciforms are slighty different (ones a little longer) so you will need to use a pk cruciform with pk gears.
|
|
|
Post by breezer on Dec 2, 2007 22:28:53 GMT
Cheers, glad it was the "easy" answer!
What about cranks? Can I put a 20/20 crank in the v100? Is it as easy as getting a different oil seal?
|
|
|
Post by hank on Dec 2, 2007 22:32:33 GMT
that should be ok, with correct oil seal
|
|