|
|
Post by shamrockexpress on Oct 14, 2007 10:12:24 GMT
Hi just purchased a pkxl clutch for my et3 standard casings. Do i need a pk clutch cover and is there any modifacations to be done. thanx.  |
|
|
|
Post by stevomtb1 on Oct 14, 2007 13:00:40 GMT
maybe this should be posted in the tech section.
there are loads of people who can answer your question there.
|
|
|
|
Post by shamrockexpress on Oct 14, 2007 15:04:35 GMT
maybe this should be posted in the tech section. there are loads of people who can answer your question there. MAGIC....................its done. can i have a FALC KIT next? ;D |
|
|
|
Post by unreliablesc on Oct 14, 2007 15:20:01 GMT
Hi just purchased a pkxl clutch for my et3 standard casings. Do i need a pk clutch cover and is there any modifacations to be done. thanx. PKXL? single spring then I presume. Bolts right on. The et3 and PKXL clutch are identical. |
|
|
|
Post by Juan on Oct 14, 2007 15:35:58 GMT
MAGIC....................its done. can i have a FALC KIT next? ;D If only. ;D If it's a XL2 multi sping unit you'll need the relavent clutch cover.I think it just bolts straight on. |
|
|
|
Post by shamrockexpress on Oct 14, 2007 19:21:18 GMT
MAGIC....................its done. can i have a FALC KIT next? ;D If only. ;D If it's a XL2 multi sping unit you'll need the relavent clutch cover.I think it just bolts straight on. Sorry forgot to say its the multi spring model! so am i correct to say i need a pk clutch cover if so will any pk one do! What is the difference (et3 clutch cover and pk) ? thanx damian  |
|
|
|
Post by unreliablesc on Oct 14, 2007 19:34:50 GMT
If only. ;D If it's a XL2 multi sping unit you'll need the relavent clutch cover.I think it just bolts straight on. Sorry forgot to say its the multi spring model! so am i correct to say i need a pk clutch cover if so will any pk one do! What is the difference (et3 clutch cover and pk) ? thanx damian My German isn't that good, but i had a look at the topic on GSF. You can apparently use you old cover, but you must use the ball-bearing thrustplate and modify your primary like this rache.org/dateien/PrimaerXL2-riesig.JPGI used a XL2 clutch without modifying the primary, and that didn't work as intended. |
|
|
|
Post by shamrockexpress on Oct 14, 2007 19:43:56 GMT
i have the thrust bearing so i,ll get a closer look at the primary and let you know the result. thanx. |
|
|
|
Post by tony on Oct 14, 2007 20:09:07 GMT
Sorry forgot to say its the multi spring model! so am i correct to say i need a pk clutch cover if so will any pk one do! What is the difference (et3 clutch cover and pk) ? thanx damian My German isn't that good, but i had a look at the topic on GSF. You can apparently use you old cover, but you must use the ball-bearing thrustplate and modify your primary like this rache.org/dateien/PrimaerXL2-riesig.JPGI used a XL2 clutch without modifying the primary, and that didn't work as intended. modify the primary? please explain unreb |
|
|
|
Post by unreliablesc on Oct 14, 2007 20:20:34 GMT
My German isn't that good, but i had a look at the topic on GSF. You can apparently use you old cover, but you must use the ball-bearing thrustplate and modify your primary like this rache.org/dateien/PrimaerXL2-riesig.JPGI used a XL2 clutch without modifying the primary, and that didn't work as intended. modify the primary? please explain unreb The XL2 basket has a slightly different profile than the standard basket. Thats all I know. As far as I can see all the Germans are modifying the primary. Someone that knows more German than me could probably explain it better. |
|
