|
Post by stevomtb1 on Oct 7, 2007 20:27:18 GMT
Right. I'm gunna tackle this job myself.
I'm off to polish my hammer ;D
Thanks for the tips.
|
|
|
Post by stevomtb1 on Oct 17, 2007 21:48:29 GMT
Ok. Carb kit is fitted(20mm Malossi with 3 stud manifold). Had a load of trouble trying to stop the fuel leak from the pipes as the clips were worn but thats sorted now.
Seems alot smoother and a bit faster ntoo.
One problem I am having is that the Polini racing air filter I purchased at the same time, won't stay on. I have tightened it up as much as poss but every time I take the scoot out it comes off causing v.bad running.
I have had to re-fit the original filter until i can sort the problem.
Any ideas?
|
|
|
Post by hank on Oct 18, 2007 15:02:35 GMT
was this the carb with the air filter included?
i've got the polini one on a dellorto 20mm carb and its fine. didnt need the seperate plastic ring thats with it. it hasn't moved yet. is the hole on the filter too big for the carb? if it is, try and use some packing, so you can tighten it up more.
|
|