|
|
Post by vinrouge on Sept 23, 2007 19:03:40 GMT
Thinking of swopping the standard exhaust for a sito+, as I'm told this should give another 3 to 5 mph. Is it a straight forward replacement that a novice could have a go at. Could anyone suggest the best way to start. (Notice there about £40 on beedspeed)
Forgot, got a PK100XL frame and a PK50, two different exhausts on Beedspeed, would they fit the same and does anyone have a clue as to which one I should order.
Rob
|
|
|
|
Post by hank on Sept 23, 2007 22:04:58 GMT
if its the std PK50 engine, then you want the PK50 one, the others for 80/100/125 cylinders.
its a pretty easy job, unless the bolts on the exhaust elbow or cylinder are rusted! you might want to get a new exhaust elbow anyway, only about £2.99. on my leo vinci, i have to prop the engine up and take the wheel off to get at the bolt going thro the swingarm, but i dont think you have to do that with the std box.
|
|
|
|
Post by Juan on Sept 24, 2007 8:12:28 GMT
Thinking of swopping the standard exhaust for a sito+, as I'm told this should give another 3 to 5 mph. Anyone claiming that from a 50 is talking utter bullshit.Yes the exhausts are restrictive but the worst part of this is down to the standard elbow.Have a look on SIP for exhaust elbows,they make a stainless steel one and Polini certainly used to do a free flow one although I'm not sure they're still available. |
|
|
|
Post by vinrouge on Sept 26, 2007 13:05:46 GMT
So basically, don't waste my money, but get some form of kit on it to improve performance
|
|
|
|
Post by Juan on Sept 26, 2007 17:28:02 GMT
I'd go with either a Polini,Leo Vince or SS50/Racer/SR type banana if you're considering any up-grades in the future.If you're not and the exhaust is in good nick then I wouldn't bother for the time being.
|
|
