|
Post by unreliablesc on Sept 18, 2007 19:59:32 GMT
A mate has big issues with setting his Malossi 136 up right.
Setup is: Malossi 136, reed on barrel. Dell'orto PHB 25 SIP EVO 2004 snail Mazz Full circle Cases matched to the kit
He just can get it to run right at low throttle openings. Have to rev it tits off to keep it running at traffic lights etc.
107 main jet i believe. X3 needle 50 pilot.
I would try to help him, but I'm not familiar with PHB's Had a Mikuni TM28 on my old 136 witch was very easy to set up.
any takers? there must be someone with a similar setup on this forum.
|
|
|
Post by adspeed on Sept 18, 2007 21:24:16 GMT
Ok....
Malossi Reed matched to barrel. 25 PHBL Simonini D&F Additional Porting incl. raised barrel reworked exhaust
Main 104 Atomiser AQ264 Needle D29P2 Pilot 50
Malossi Reed matched to barrel. 25 PHBL Hammerzombie Additional Porting incl. raised barrel reworked exhaust
Main 110 - This was on the limit I'd go 112 for safety. Atomiser AQ266 Needle D29P3.5 Pilot 50
This was my findings on the barrel in the Malossi thread on this forum, hope it helps.
;D
|
|
|
Post by MiNiKiN on Sept 26, 2007 18:41:36 GMT
|
|