|
|
Post by hanlia1888 on Mar 8, 2010 18:11:16 GMT
hi guys ive got px125 with a malossi 166 kit on it scoot goes great the problem is when riding slow up to about 40mph it splutters a bit...  after 40mph scoot goes fine ive been told to up the slow running jet im just wondering if anyone else has had this problem and what number jet they used ....many thanks |
|
|
|
Post by vespa on Mar 13, 2010 14:10:07 GMT
wot main jet u running it on m8 |
|
|
|
Post by hanlia1888 on Mar 14, 2010 10:44:49 GMT
hi mate its got a 115 main i know its pretty big but goes well do you think that could be problem maybe put it down to a 112 .....many thanks
|
|
|
|
Post by vespa on Mar 14, 2010 10:54:55 GMT
i had the same prop with mine yes try a smaller main jet the 115 main jet is ok 4 when you are running it in after that you should go down in jet size or two and dont 4 get to keep a eye on the plug ;D ;D ;D ;D ;D ;D
|
|
|
|
Post by ets on Mar 16, 2010 0:47:51 GMT
If you've a 20/20 your carb set up should look pretty much like this with your malossi:
Air corrector 140
Mixer tube BE5
Max Jet 108 or 110 tops (really)
Idle 48/160
Air mixture screw @ 2 or 2 and 1/2
115 is big but as Vince says keep an eye on the plug and decrease gradually.
|
|
|
|
Post by spiderwebb on May 9, 2010 18:39:49 GMT
US 100 sport
I have a 90 main in the 19/19 stock carb
stock air filter (1/2 of metal filter removed)
malossi 136 kit
polini exhaust
she runs fine... 55.1 mph top speed
shall be going direct cylinder induction this fall with a minkuni flat side 24mm carb & electronic ignition upgrade from the points that are there now...
|
|
