|
|
Post by shamrockexpress on Jul 29, 2007 22:30:06 GMT
Hi guys just put my et3 back on the road and it keeps blowing bulbs!!!!!!!!!!!!!!mostly the head light high and low beam 6 volt 25/25 watt it is also doing the stop light which i am using 6volt 10 watt, there is no unusual vibration and earth connections arew all good......................the only thing non standard is the use of pk 20mm taper flywheel running on the et3 stator...any help would be much appreciated.........thanx  |
|
|
|
Post by tony on Jul 29, 2007 22:56:11 GMT
hi mate, I don't know the in and outs of using a pk(12v system) with a et3 stator. But I use one on my et3 but its a 12v system now with a regulator. Firstly you need to get a volt meter on the junction box and read the output of the lighting circuits when you rev the bike up. You may find the circuit (might be yellow on et3 loom)thats over producing current and you may simply be able to regulate this circuit or get the offending coil rewound. If it was me I'd rewire and reswitch the whole bike to 12volt with a beedspseed or sip conversion loom(or make yer own).
hope this helps.
|
|
|
|
Post by damian on Jul 30, 2007 22:49:01 GMT
thanx for that tony i will get out the multimeter and see what the voltage is, if there is a contradiction between the flywheel and stator i will switch to 12 volt as the bulbs are more easily available, will keep you posted on my findings................PS is this the same tony from scoot racing uk forum?
thanx Damian
|
|
|
|
Post by tony on Jul 31, 2007 0:23:36 GMT
yes mate.. I can't be bothered with a forum name!
|
|
