|
Post by scootlife on Feb 15, 2010 19:24:46 GMT
Picked up an LML Disk the other week , and having problems with indicators. they are not flashing just staying on. i have bought a new flasher relay but still the same. Any other thoughts on what it could be
|
|
|
Post by willspeed on Feb 15, 2010 20:25:05 GMT
same thing happend with my pk once, red wire in the switching unit had come away. got the soldering iron out and its sorted a good un.
|
|
|
Post by scootlife on Feb 15, 2010 20:37:10 GMT
I did wonder about the switch but couldnt fathom out what could be wrong with it.
will give it a try, cheers
|
|
|
Post by willspeed on Feb 15, 2010 20:54:10 GMT
if LML lekkys are anythng like piaggio ones then it will have a dodgy switching pattern took me ages to figure it out even with a diagram.
|
|
|
Post by scootlife on Feb 15, 2010 21:31:53 GMT
I would imagine they could be worse.
Out in the garage tomorrow then trying to sort it..
|
|
|
Post by scootlife on Feb 16, 2010 16:14:32 GMT
Nope , switch and wires all appear to be ok. Anyone else got any thoughts ?? If not 2004 LML Disc brake model £400 anyone ?
|
|
|
Post by triffid on Feb 16, 2010 18:59:17 GMT
Check all your earth connections, if needs be scrape away a bit of the paint to get contact with the frame. Had similar problem wit my PX and this sorted it.
|
|
|
Post by thedarklord on Feb 17, 2010 11:51:16 GMT
had a problem with my p200 cleaned the connections to the frame with wd40 and bingo
|
|
|
Post by 225worb on Feb 18, 2010 8:25:35 GMT
|
|
|
Post by thedarklord on Feb 18, 2010 10:36:20 GMT
eyes down looking young nik ;D
|
|