ozzy
Automatica
Posts: 4
|
brakes
Jul 13, 2007 11:31:14 GMT
Post by ozzy on Jul 13, 2007 11:31:14 GMT
my quest for some secondhand pk 20mm forks isn't going to well.. i've heard people mention a few "mod's" that will make the standard smallie drums effective enough? does anyone have any tips? o
|
|
|
brakes
Jul 13, 2007 14:52:33 GMT
Post by MiNiKiN on Jul 13, 2007 14:52:33 GMT
my quest for some secondhand pk 20mm forks isn't going to well.. i've heard people mention a few "mod's" that will make the standard smallie drums effective enough? does anyone have any tips? o YES ;D put some strips of emery on the inside of the brake drum and fit it . turn and ensure the shoes make contact, continue until the whole shoe brake surface makes contact with the drum. Remove the lever ensure it turns freely in the bore, eventually slightly increase bore diameter (preferably with a reamer). rounden the edges of the "thingy" that actuates the shoes. Thouroughly grease the stuff (referably using waterproof grease) Finally ensure the damper is doing its job as meant
|
|
ozzy
Automatica
Posts: 4
|
brakes
Jul 13, 2007 15:15:58 GMT
Post by ozzy on Jul 13, 2007 15:15:58 GMT
cheers mikini, all sounds sensible
|
|