|
Post by atufte on Apr 6, 2007 12:59:40 GMT
Hello
I'm about finished with my Vespa project, but need some few finishing tips, i have a PK XL/POLINI 130, and a dellorto 19/19, Sito Plus exhaust and so on, but what dimension "air jet screw?" do i need for my carb on this setup, this carb used to be on a V50 engine with 75 Polini, Sito Plus, etc...
Thanks in advance...
|
|
|
Post by Juan on Apr 7, 2007 10:16:14 GMT
If you mean the idle jet use a 45.
|
|
|
Post by MiNiKiN on Apr 11, 2007 22:49:17 GMT
Every engine differs - there is no such thing as a standard 133 with 19/19 jet! bt to help you with where to start with: check some 133 plus 19/19 setups here: sfs.alexander-hepp.de/
|
|