|
|
Post by czechers on Feb 13, 2007 19:37:49 GMT
Fitting new bearing track on my Paella power Prim125 -swapping Spanish for Italian how should it look when finished- I can't quite see hoe far the track taps down?
Will take a picture if I'm being unclear. :P
|
|
|
|
Post by Juan on Feb 13, 2007 23:56:00 GMT
Might help,I can't quite picture what you're on about.But then I have spent the evening with my Kraut buddy.   ;D |
|
|
|
Post by czechers on Feb 17, 2007 14:28:47 GMT
 Is that about right? |
|
|
|
Post by guy160 on Feb 17, 2007 16:10:41 GMT
All the way down as far as it'll go, so it holds the dust cap down.
|
|
|
|
Post by czechers on Feb 17, 2007 19:32:42 GMT
It won't go any further  and it's level with the lip arrowed- could there be a difference in the forks as well as the track and bearing sizes on this Spanish Scooter?  |
|
|
|
Post by guy160 on Feb 17, 2007 20:36:09 GMT
Possibly, but I doubt it. From the pic it looks like there's still free space underneath it.
|
|
|
|
Post by czechers on Feb 21, 2007 0:05:03 GMT
Well I applied heat and whacked it and whacked it with a drift.
Feck all- So I shoved em back in the scooter.
I'll tell every one I've got a very subtle 1cm fork extension-because I'm a very low key scooterist. Even my grass skirt is modestly ankle length.
|
|
|
|
Post by MiNiKiN on Feb 22, 2007 21:57:17 GMT
might be a bit late - but you should have heated it ~200degC and used a long pipe and a huge hammer to evenly push it onto the seat - the way it is it'll soon come loose I suspect.
|
|
and it's level with the lip arrowed- could there be a difference in the forks as well as the track and bearing sizes on this Spanish Scooter?