|
Post by tony on Jul 25, 2009 11:24:41 GMT
Due to popular demand Charlie at Performance Tuning is going to stock these modified fuel taps for smallies and P Ranges. This is a necessity in my opinion for tuned motor running a bigger carb. They come with hi flow reserve too. Price is £30 plus postage. No need to send him a fuel tap. Just call him on 01604 765425 to order. If no answer leave a message as he'll be porting or on the dyno.
|
|
|
Post by swallow on Jul 25, 2009 11:33:38 GMT
that is good news presumably functionality is the same as the standard - ie turns on/off and reserve in normal position?
|
|
|
Post by scooterslag on Jul 25, 2009 13:11:51 GMT
Ideal, £30 is a decent price and I can say my PK's been tuned by Charlie ;D
|
|
|
Post by tony on Jul 26, 2009 1:38:03 GMT
Yes as per normal . I've watched him modify these things and they take a good while so I told him 30 quid is too cheap considering a standard one is what 15 quid anyway? But thats Mr Edmonds for ya. So there you go. Btw these taps have been measured for flow/time and more than meet the level we need. Its a safety measure. Put it this way.. I insisted on fitting one of these to Sarah's bike. I've seen the results of standard taps and full throttle not delivering.
|
|
|
Post by swallow on Jul 27, 2009 20:37:23 GMT
Is Charlie on here (I mean the forum)? Or does he have an email that one can contact him on?
|
|
|
Post by swallow on Jul 28, 2009 20:30:14 GMT
Having fitted a fast flow fuel tap, would one also need to modify the breather hole in the tank filler cap? Its only a little hole and cant be letting much air in or out in a hurry?
|
|
|
Post by tony on Jul 28, 2009 23:23:43 GMT
You must make sure its clear. Charlie will tell you a flow rate the tap can deliver and you can check. Mine fuel cap was ok standard Tom. We tested. But a good question mate.
|
|