ash
Automatica
Posts: 0
|
Post by ash on Jul 11, 2009 23:35:28 GMT
hi new project engine coming soon ;D
some specs:- stroke: 51mm bore: 56mm cc: 125.6 intake: direct 4 petal reed carb: 28mm phbh exhaust: modified simonini 180 reverse pipe cooling: water power: 15-20hp
watch this space for updates
|
|
stehughes
V90
1981 100 Sport, DR 130
Posts: 64
|
Post by stehughes on Jul 11, 2009 23:53:42 GMT
I'll be watching! That new avatar is mad... love it!
|
|
|
Post by Juan on Jul 12, 2009 8:30:06 GMT
I'm just seeing a red cross?
Intresting Ash, I'm watching.
|
|
|
Post by madmax on Jul 12, 2009 8:32:24 GMT
I'm watching too. ;D
|
|
|
Post by ttscshaggy on Jul 12, 2009 22:06:45 GMT
ill be watchin dude as i eventually want to go watercooled ;D
|
|
ash
Automatica
Posts: 0
|
Post by ash on Jul 12, 2009 23:03:24 GMT
just gotta get cylinder sleeved then will get some pics up
|
|
ash
Automatica
Posts: 0
|
Post by ash on Jul 13, 2009 11:10:34 GMT
|
|
|
Post by swallow on Jul 13, 2009 12:57:00 GMT
Do you find it difficult working in a sauna?
|
|
|
Post by scooterslag on Jul 13, 2009 13:28:56 GMT
Do you find it difficult working in a sauna? ;D ;D ;D ;D Looking good Ashmondo- should be a corker when its done chap
|
|
|
Post by Turbojeger on Jul 13, 2009 19:29:29 GMT
I'll be watching! :-)
Please clean your camera lense... ;-)
|
|
|
Post by unreliablesc on Jul 13, 2009 20:07:31 GMT
ooh..nice!! keep us posted i just came back from the vesparados run in mindelheim, germany, and all i can say is that I have seen the future, and it's a proto...
|
|
ash
Automatica
Posts: 0
|
Post by ash on Jul 13, 2009 21:18:36 GMT
Do you find it difficult working in a sauna? i think there was oil on the lense ;D
|
|
ash
Automatica
Posts: 0
|
Post by ash on Jul 14, 2009 22:24:25 GMT
dropped cylinder off today to be sleeved will get it back next week sometime
|
|
|
Post by tony on Jul 15, 2009 0:11:48 GMT
That barrel has the potential to make a lot more (21)than that ash. Hope you decide to fit it the right way round tho? I hate the carbs sticking out the side..
|
|
ash
Automatica
Posts: 0
|
Post by ash on Jul 15, 2009 9:24:52 GMT
what do u suggest doing to the barrel? its guna be reversed, easier to mod the pipe going to try my best to keep the carb within the frame, may just stick out a smidgen
|
|
|
Post by ttscshaggy on Jul 15, 2009 21:48:44 GMT
i think its cool with the carb out
|
|
|
Post by tony on Jul 15, 2009 22:46:04 GMT
what do u suggest doing to the barrel? its guna be reversed, easier to mod the pipe going to try my best to keep the carb within the frame, may just stick out a smidgen Try find out what it made on the bike it came from. But looking at the areas and angles from the oily pic it looks good to me. The bike it come from would of had a larger volume in the crankcase I'm sure so if you are using the right pipe then to get the best I'd try and match that volume if poss. Once all that is done you can play with timings to get it to work with 4 gears. If it doesnt want to play then another pipe may be needed to widen the band.
|
|
ash
Automatica
Posts: 0
|
Post by ash on Jul 16, 2009 20:32:58 GMT
12 hp @ 7000 rpm standard, but i think its restricted
just read the standard exhaust is very restrictive also a restrictor on the intake
|
|
|
Post by dayle1991 on Jul 19, 2009 16:55:14 GMT
what bike is that cylinder from ash?
|
|
ash
Automatica
Posts: 0
|
Post by ash on Jul 19, 2009 17:20:20 GMT
cylinder is from a 1988 honda nsf125 shud be getting it back tomoz from the machinist ;D
|
|