ash
Automatica
Posts: 0
|
Post by ash on Jul 9, 2009 21:39:13 GMT
tuned and built by ashspeed ;D indicators welded up back end smoothed left panel welded and smoothed engine is dr130, ported 28mil flatslide delly pm tuning pipe lightened flywheel       |
|
|
|
Post by dayle1991 on Jul 9, 2009 21:43:37 GMT
very nice ;D
i like the idea of the lhs door welded up
|
|
|
|
Post by newboy on Jul 9, 2009 21:44:32 GMT
i like that  |
|
|
|
Post by vinrouge on Jul 10, 2009 20:32:22 GMT
Nice job on the scoot, thought from the first picture it was going to be fluorescent paint, it's not is it ?
Rob ;D
|
|
|
|
Post by Turbojeger on Jul 10, 2009 21:26:48 GMT
Good looking scooter! :-)
Just out of curiosity, which inlet manifold and reed valve are you using to position the carb on the side? Is it the Malossi 25mm inlet with reed-valve, inverted? Does it interfer with the kickstart at all?
|
|
ash
Automatica
Posts: 0
|
Post by ash on Jul 10, 2009 21:31:44 GMT
its not reedvalve mate its still rotary its a short side exit 2 stud 28mil manifold paint isnt fluorescent, just normal  |
|
|
|
Post by Turbojeger on Jul 10, 2009 21:35:38 GMT
Ah, okey, thanks! :-)
|
|
