50 special project

[toffeemandog]

just got back from picking this up, bits of surface rust but not too bad, got a malossi 133 kit on and a polini exhaust. currently a non runner (no spark) but kicks over with good compression and was running last year..I was going to restore it but if i can get it running sweet i will use it as it is. Front suspension is very soft though probably needs replacing..Tony

[madmax]

Not a bad find. Did you pay much for it?

[toffeemandog]

sent you a pm max. On closer inspection it is actually an ET3 engine which is a bonus..

[madmax]

Nice one. Might want to sort those dangling wires though.

;D

[vinrouge]

Great looking project you've got yourself there. As you say looks good enough to run as is. ;D

Rob

[toffeemandog]

first time i got to have a little fiddle with it today. Rewired the stator and cleaned the carb and it fired up ok and settled down to a nice tickover. ive noticed it Needs the drive shaft oil seal doing as well. i found Its got a dellorto 24 phbh which was a nice surprise. i have only just noticed they have opened the inlet manifold hole in the frame up quite a bit so will have to try and sort that but on the whole i am very happy.