et3 headset

mark Parmakit Posts: 773	et3 headset May 20, 2009 15:48:35 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by mark on May 20, 2009 15:48:35 GMT underneath my headset are two screw holes eatherside, am i supposed to have underneath bits fixed or are they for extras, also the wireing to the switches seems to rub on the throttle bar, is there a way of routeing it so it dosent rub

Juan Administrator Posts: 9,411	et3 headset May 20, 2009 21:40:38 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Juan on May 20, 2009 21:40:38 GMT Bolt holes underneath are for the mounting of mirrors and / or flyscreens etc. The wiring shouldn't really rub too badly if it's run properly.
	Black Widdas S.C. - Taking idiocy seriously since 1999.

tony Falc Posts: 2,090	et3 headset May 20, 2009 23:25:01 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by tony on May 20, 2009 23:25:01 GMT wiring should be up above the tube.