|
Post by vespa on May 7, 2009 18:55:24 GMT
hi if been told that the pm40 ev pipe does not pull 4th gear is this true ? or as any one found them not to pull 4th gear thanks guys ;
|
|
|
Post by smallyshane on May 7, 2009 19:17:23 GMT
That depends on what its on mate... I had one on a polini maz crank and phbl 24 and didn't have any problems with 4th Same pipe on an M1 with same crank and carb and it didn't I am not sureif the flywheel played a part or not as I had full weight et3 on the polini and 1300g on the M1. So the big question is, What you putting it on ;D
|
|
|
Post by vespa on May 8, 2009 16:48:20 GMT
hi there m8 its on a pk100xl engine mallosi 135 25 mill carb 102 main jet 4 plate clutch casings ported to match kit also crank as been cut it goes real well in all gears but revs out in 4th o and allmost 4 got its got a 27/69 up gear kit on 60mph flat out ??
|
|