|
Post by johnet3 on Apr 16, 2009 11:06:32 GMT
Since my ET3 was kitted (DR135), the clutch is slipping under acceleration. Can the current clutch be adjusted or do I need to upgrade?
|
|
|
Post by madmax on Apr 16, 2009 11:26:36 GMT
Clutch cable could be to thight or clutch is gone.
Are you home? PM me your address and I pop over if you want.
|
|
|
Post by johnet3 on Apr 16, 2009 15:04:21 GMT
Thanks for the offer madmax (see PM). I'll have to study the receipt from the shop who kitted my scoot, but I think they fitted new cables so I guess they'd be tensioned correctly. Looking around the web, I've seen a 4-plate Malossi clutch kit which purports to be a good idea for kitted ET3, so I'm thinking there is maybe an issue with trying to drop in too much power through the standard 3-plate clutch now it has been kitted. Does this make sense?
|
|
|
Post by madmax on Apr 16, 2009 18:06:49 GMT
If it is a new clutch, it should not slip yet. Even with a DR. As I've said earlier, could be the cable that's too taught. Or maybe the oil is the wrong type.
Anyway, you have a PM back. ;D
|
|