|
My ETS
Mar 15, 2009 20:48:43 GMT
Post by ttscshaggy on Mar 15, 2009 20:48:43 GMT
~here is my ETS not finished an on going project i think it looks boss ;D all ported, 25mm carb what ya think of it guys?
|
|
|
My ETS
Mar 15, 2009 20:49:57 GMT
Post by ttscshaggy on Mar 15, 2009 20:49:57 GMT
just realised this is a slightly older pic of it tis a tad different to that now will update tomorow ,when it is daylight to take photo
|
|
|
My ETS
Mar 15, 2009 21:08:50 GMT
Post by Perkin on Mar 15, 2009 21:08:50 GMT
Black looks good. I might eventually do mine black.
|
|
|
My ETS
Mar 17, 2009 17:02:23 GMT
Post by scooterslag on Mar 17, 2009 17:02:23 GMT
Looking good chap, is that a p-range headset on it?
|
|
|
My ETS
Mar 17, 2009 19:43:34 GMT
Post by sugarlump on Mar 17, 2009 19:43:34 GMT
Nice scoot pal, black and yellow is a winner. Good hugger too
|
|
|
My ETS
Mar 17, 2009 22:45:50 GMT
Post by ttscshaggy on Mar 17, 2009 22:45:50 GMT
Got a more upto date pic not the best lightng conditions but it will do homemade racey style seat on it my SIP curly on the floor put malossi kit on it today ;D will be fabricating a direct intake manifold for a 28mm phbh
|
|
|
My ETS
Mar 18, 2009 9:39:01 GMT
Post by Perkin on Mar 18, 2009 9:39:01 GMT
Hey mate- what you doing with your original ETS seat?
|
|
|
My ETS
Mar 19, 2009 20:30:45 GMT
Post by 225worb on Mar 19, 2009 20:30:45 GMT
Hmmm Is that a P E headset youve got on it ? Does it go even better now youve ported it ?
|
|
|
My ETS
Mar 25, 2009 19:37:33 GMT
Post by ttscshaggy on Mar 25, 2009 19:37:33 GMT
yeah it is a P E headset yeah ported to the ETS barrel , went pretty good dunno weather to get the cases matched with malossi
|
|
|
My ETS
Mar 25, 2009 19:48:32 GMT
Post by madmax on Mar 25, 2009 19:48:32 GMT
dunno weather to get the cases matched with malossi Go on, you know you want to. ;D
|
|
|
My ETS
Mar 25, 2009 20:05:02 GMT
Post by ttscshaggy on Mar 25, 2009 20:05:02 GMT
at Perkin i might part with the seat matey
|
|
|
My ETS
Mar 25, 2009 20:47:15 GMT
Post by Juan on Mar 25, 2009 20:47:15 GMT
Port it or we'll all point and laugh at you. ;D And queue Max.
|
|
|
My ETS
Mar 25, 2009 20:52:18 GMT
Post by madmax on Mar 25, 2009 20:52:18 GMT
Port it or we'll all point and laugh at you. ;D And queue Max. ;D ;D ;D ;D
|
|
|
My ETS
Mar 29, 2009 13:23:57 GMT
Post by ttscshaggy on Mar 29, 2009 13:23:57 GMT
hahah will have to get me dads maytes pronto then and rob his dremmel ;D
|
|
|
My ETS
Mar 29, 2009 18:20:05 GMT
Post by stewart on Mar 29, 2009 18:20:05 GMT
Nice scoot pal, black and yellow is a winner. Good hugger too Have a new one of those i'm not using no bracket though
|
|
|
My ETS
Mar 29, 2009 20:58:27 GMT
Post by Perkin on Mar 29, 2009 20:58:27 GMT
at Perkin i might part with the seat matey Heh heh. I collect 'em. 'Til I get the perfect one, that is! Yours looks pretty good...
|
|
|
My ETS
Mar 30, 2009 17:23:35 GMT
Post by ttscshaggy on Mar 30, 2009 17:23:35 GMT
it is in good nick one tiny tear in the stitching thats bout it really
|
|
|
My ETS
Jul 2, 2009 15:03:05 GMT
Post by ttscshaggy on Jul 2, 2009 15:03:05 GMT
right once the 100 sport is done, well.. there never really done are they the ETS is going for a complete transformation its going to be de-indicatored ,slightly cut up at the back 50 special drops will be made for it , with hella bar end indicators and im thinkin aprilia rotax barreled watercooled i know i need full circle race crank but what about rod length will be lookin out for a delly 34mm carb on ebay, so fairly decent priced what about clutch, maybe just 4 plate one with carbon plates? preferably summat better thinkin malossi shock on front , fournales shock on back just want to make an monster smally ;D
|
|
ash
Automatica
Posts: 0
|
My ETS
Jul 2, 2009 15:52:53 GMT
Post by ash on Jul 2, 2009 15:52:53 GMT
im in the process of fitting a ns125f barrel im guna use either a bultaco 200 or a sachs 125 rod
how do u wanna go bout fitting the barrel, have the casings cut and a huge alloy block welding to it, or using a conversion plate?
|
|
|
My ETS
Jul 2, 2009 16:05:06 GMT
Post by Wayne Miller on Jul 2, 2009 16:05:06 GMT
If you go for a conversion plate you'll need 12mm high quality alumium plate and a full circle, 54mm stroke, fitted with a modified 110mm conrod. Try here for the crank: shop.strato.de/epages/61438057.sf/en_GB/?ObjectPath=/Shops/61438057/Products/SS200809Ive nearly got all the bits for mine. I only need the crank......... the ally plate machining............. the casings welded............ the casings machined................. Fook, Im miles away from getting it done Good luck
|
|