nickh
50 Special
Posts: 27
|
Post by nickh on Apr 5, 2024 11:18:50 GMT
I bought a primavera frame so I could build a 40+ year old scooter for riding to work (Khan's ULEZ) and like anything else it has gone from cheap and cheerful to having an Egig engine and metalflake paint job etc. What I would like to know is if I put the 12 volt DC version of the Vape ignition in it do I use the original loom or an I going to have to make a hybrid loom of some sort. The reason for wanting DC is so I can put LED lights on it, possibly charge my phone and |I hate the duck fart buzzer that masquerades as an AC horn.
cheers
Nick
|
|
|
Post by henri on Apr 8, 2024 6:52:00 GMT
you will need a 12 volt loom an switches for a start ,an a dc horn . but on full dc systems you either need to have lights on all the time ,or to fit a small battery somewhere . without a battery as a voltage dump the reg/rectifier gets a hard life unless lights are on .H
|
|
nickh
50 Special
Posts: 27
|
Post by nickh on Apr 9, 2024 8:56:10 GMT
you will need a 12 volt loom an switches for a start ,an a dc horn . but on full dc systems you either need to have lights on all the time ,or to fit a small battery somewhere . without a battery as a voltage dump the reg/rectifier gets a hard life unless lights are on .H I can live with a small battery somewhere, which model 12v loom and switches do need to get?
|
|
|
Post by henri on Apr 9, 2024 13:08:38 GMT
which loom depends on which scooter , v range ,50 special or pk , as does what switch to get . the brakelight switch is just a normal px one . message me an i'll sort you out .H
|
|