tren
Automatica
Posts: 8
|
Pk125xl
Aug 25, 2023 13:45:36 GMT
via mobile
Post by tren on Aug 25, 2023 13:45:36 GMT
Hi I have a pk125xl I rebuilt it back in 2018 run it in and it has been left in the shed since lockdown... I changed all the bearings maz crank malossi 136 kit drt runner short 3rd and 4th malossi clutch plates and spring changed the gearing (can't remember what to will have to look Inthe shed) and I have a pm40 exhaust..when I built this I was told that it would power wheelie that's what I wanted to build but it dont .it is fast hits 70mph... What I'm lookin for is if I go into 2 or 3rd I have to sit forward to keep the front down..can I do this with what I have but by changing the gearing or do I have to build a m200 engine.. Any help would be appreciated I just want a fast pokey scooter.. Thanks lee
|
|
tren
Automatica
Posts: 8
|
Pk125xl
Aug 26, 2023 9:11:00 GMT
via mobile
Post by tren on Aug 26, 2023 9:11:00 GMT
It's quiet here
|
|
|
Post by henri on Aug 26, 2023 10:43:04 GMT
to get what you want you will have to step up from a malossi 135 kit ,up into ali barrel 144 kits an 26-28mm carb territory .an a more aggressive pipe than a pm40 for sure .H
|
|
tren
Automatica
Posts: 8
|
Pk125xl
Aug 26, 2023 17:05:27 GMT
via mobile
Post by tren on Aug 26, 2023 17:05:27 GMT
Thanks for getting back to me Henri.. My cases have been matched to the malossi cylinder.. Will I be able to use a parmakit or the quatrini mil 60 with these cases? Or will there be enough meat left to match these.. Thanks lee
|
|
tren
Automatica
Posts: 8
|
Pk125xl
Aug 27, 2023 18:45:28 GMT
via mobile
Post by tren on Aug 27, 2023 18:45:28 GMT
I'm looking at the falc 154 and 180 at the moment. Saw some YouTube footage of a 180 looked amazing... I will be stripping my pk when I get round to it ,my plan is in a few years my pk is mot and tax exempt and ulez(found a place near me that gets two strokes a ulez certificate got my wife's Piaggio zip done beginning of August) so I want to have it built to how I want by then ,so I can take my time with it.. Want to spray it neon blue(well that's what im leaning to at the moment and I want to do a front disc conversion as well.. So I have a few things to keep me busy after I have done the wife's projects that I have to do first.. I'm glad I have found this site I will probably have a few questions and there seems to be knowledgeable people on here.. All the best lee
|
|