|
Post by swiss1939 on Jun 9, 2021 2:25:57 GMT
I've got a v100 with turn signals whose brake lights only turn on when the turn signals are on and the brake pedal is depressed. Trying to sort out if it's a stator issue or a wiring issue like crusty harness in the frame that needs replacing. The stator was rewired and repaired professionally, so i am leaning towards a short or something in the harness, but am wondering if anyone has seen this before and can suggest where to start or test? I have removed the brake switch to confirm it is not a faulty brake switch.. so my brake light should currently always be on, but only turns on with the turn signals as mentioned. Also wondering which harness should be purchased if new is needed? Can't find a v100 specific harness listed, but i am thinking the v90 is the same? wiring diagram included below. photos.app.goo.gl/8uSQ14GVwMHTMxSA9photos.app.goo.gl/Bjyg11Ko6AGC2ik2A
|
|
|
Post by swiss1939 on Jun 6, 2022 20:40:01 GMT
|
|
|
Post by tzsteve on Jun 12, 2022 15:35:38 GMT
So a simple fix then😀
|
|