|
|
Post by elflapo on Mar 14, 2020 18:33:40 GMT
Evening. I've got the engine out of my 50r and I am waiting on a stand to test it before refitting. Just wanted some pointers on stopping the engine once it's running. Also is there a thing to be wary of when testing on the stand?
Cheers
|
|
|
|
Post by nickj on Mar 15, 2020 23:52:52 GMT
Stopping is easy - just put your hand over the carb intake and it will die. Much better than trying to pull the spark plug lead off....that also works but you get to do a little dance as well. And not good if you have a pacemaker 🙂
|
|
|
|
Post by henri on Mar 16, 2020 13:26:23 GMT
an weight the stand down ,they can walk about an even fall over ,always flywheel side down ,loose all ya fins that way . for stopping a extra green wire on cdi if electronic ,or just ground the red kill wire if points .H
|
|
|
|
Post by elflapo on Mar 16, 2020 13:30:53 GMT
Cheers guys. Ill definitely look to weigh the stand, hadn't considered that at all.
Thoughts on running an extension on the wiring to connect to the scooter? I was hoping that this way I could check everything electric at the same time.
|
|
