|
Post by bofs on Oct 2, 2008 18:28:31 GMT
|
|
|
Post by madmax on Oct 2, 2008 18:37:13 GMT
Nice work mate.
|
|
|
Post by Juan on Oct 2, 2008 19:08:22 GMT
Cool, I've no doubt it'll turn out as tasty as your previous work mate.
|
|
|
Post by breezer on Oct 2, 2008 19:22:30 GMT
mmmmmmm red oxide I meant that to look "drool" but I'm not sure it does. emoticons eh is there enough room for the carb to move when the engine swings?
|
|
|
Post by bigchap on Oct 2, 2008 19:48:22 GMT
you come from muff? what an excellent place to live!
|
|
|
Post by bofs on Oct 2, 2008 19:54:31 GMT
mmmmmmm red oxide I meant that to look "drool" but I'm not sure it does. emoticons eh is there enough room for the carb to move when the engine swings? Still tweaking that hole,just trying to keep it as small as I can get away with.
|
|
|
Post by breezer on Oct 2, 2008 19:57:43 GMT
makes sense, lot of good work there.
|
|
|
Post by toffeemandog on Oct 3, 2008 14:33:08 GMT
how much were the new leggies ?. i cant find them on the sip site..
|
|
|
Post by madmax on Oct 3, 2008 14:51:46 GMT
|
|
|
Post by stewart on Oct 4, 2008 13:56:18 GMT
I didn't know you could do that with the manifold, smart though if it was on mine I'd keep kicking it
|
|
|
Post by breezer on Oct 4, 2008 17:37:54 GMT
Can only rotate a 2 stud manifold 180 degrees - if you have a 3 stud manifold you need to replace it with a r/h one or cut & weld it
|
|
|
Post by MiNiKiN on Oct 5, 2008 15:09:22 GMT
Good work - did you weld a temporary stiffening in before you took the legshield off? If not lets just cross fingers and do a few prayers!
|
|
|
Post by knowledge on Oct 7, 2008 21:38:54 GMT
Hmmm. Mr Burnside. Is Birdy taking care of the paint for you Bofs?
|
|
|
Post by bofs on Nov 5, 2008 20:02:14 GMT
He`s due back over here in the next week or two, so he may be firing the paint at it ;D
Anyone know who stocks the long 4" carb rubbers,marked CDC, as used above??
|
|
|
Post by bofs on May 13, 2009 11:20:05 GMT
Had to go back a few pages there to find me thread. A bit more progress at last, my mate Gary was threatening to buy a motorbike if I didn`t get the finger out. A nice day for rubbing down and gettin the head frazzled All over in white to ensure a nice even topcoat This morning, the sun`s still out so time for topcoat
|
|
|
Post by candikid on May 13, 2009 13:30:38 GMT
damn, you're good!
|
|
|
Post by bofs on Jul 9, 2009 22:51:21 GMT
|
|
|
Post by dayle1991 on Jul 10, 2009 8:22:28 GMT
look the nuts mate ;D can i ask where you got that number plate, is it a sticker one? cheers
|
|
|
Post by madmax on Jul 10, 2009 15:00:03 GMT
Nice work.
|
|
|
Post by scooterslag on Jul 10, 2009 15:59:49 GMT
Very nice
|
|