|
Post by daz on May 30, 2012 19:04:50 GMT
Evening Forum I am fortunate to be a good friend of Mr Shiny Red Tuning who is based a few miles from me in the Stroud valleys Mr Shiny wanted to check the compression on my ET3 and suggested a run on his dyno to see how she was running. Last year she was consistent and was averaging about 14.9bhp on a regular basis which out of my old cast iron Worb 5 Polini I was well chuffed with. Got to say I was a happy boy tonight as she hit plus 15. I am not hung up on getting more bhp, why would I be still running good old cast iron however being able to run the scooter on the dyno was an experience under the watchful eye of Mr Shiny. Happy days. Daz x
|
|
|
Post by scooterist on May 30, 2012 22:52:27 GMT
sounding good Daz..... im not to clued up on Dyno`s, but ive stood and watched and listened to bikes on dyno`s that make more than 15 bhp but dont sound anywhere near as good as this... ;D is "SHINY" bringing his dyno to any rallies this summer do you know... ?
|
|
|
Post by daz on May 31, 2012 13:44:30 GMT
Afternoon Col
I am no expert by any means on the dyno, just very thankful that Mr Shiny explains the graphs to me in "lay mans" terms so to speak.
Yes she does sound pretty sweet through that JL.
He is very busy with Runner stuff at present, I think he is at Mersea though with the dyno.
Hope all good with you sir, fish and chips at Weston?
Daz x
|
|
|
Post by vinrouge on May 31, 2012 15:30:23 GMT
Very impressed with that, not overly familiar with the output from the dyno but them graphs look pretty good to me.
|
|
|
Post by bikegrim on May 31, 2012 17:07:33 GMT
Daz - which pipe is it -JL? do you need to remove toolbox for that? G
|
|
|
Post by jacques on May 31, 2012 18:34:48 GMT
Daz - You coming up on the 9th to meet me and "The Don" at Shiny's?
|
|
|
Post by madmax on May 31, 2012 21:33:16 GMT
Good result Daz. I'll see you on the 9th.
|
|
|
Post by daz on Jun 1, 2012 8:19:15 GMT
Morning Gents
Gareth : The JL pipe is a down and forward version that works with the toolbox still in place.
Not a pipe to set the world on fire but ok for my needs.
Jacques: Yes looking forward to meeting you and making coffee for the "Don" also.
I will sort out immigration issues to get you both into the Stroud Valleys.
See you on the 9th gents.
Daz x
|
|
|
Post by jacques on Jun 1, 2012 13:05:10 GMT
Morning Gents Gareth : The JL pipe is a down and forward version that works with the toolbox still in place. Not a pipe to set the world on fire but ok for my needs. Jacques: Yes looking forward to meeting you and making coffee for the "Don" also. I will sort out immigration issues to get you both into the Stroud Valleys. See you on the 9th gents. Daz x No need for a passport...I have a work pass as I'm designing a housing scheme in Littlecombe, Dursley.
|
|
|
Post by bikegrim on Jun 1, 2012 14:05:03 GMT
ta
|
|