|
Post by swallow on Oct 17, 2011 8:51:41 GMT
Now available seperately I have: PK 12v Flywheel 1750g approx 19mm cone brand New Piaggio part, never mounted £55 posted DSCF2642 by vespaloco, on Flickr PK 12v Stator brand new Piaggio part, never mounted, for battery models but could be used with any 12v wired smallframe I'm sure £45 posted DSCF2645 by vespaloco, on Flickr
|
|
|
Post by scootsmith on Oct 17, 2011 20:45:16 GMT
I will have the flywheel off you, been looking for one to fit my et3 for a wee while. Will it work with the 6 v original stature? Can't afford both.
|
|
|
Post by swallow on Oct 18, 2011 7:27:14 GMT
I'd be pretty certain that a 12v flywheel won't work with a 6v stator but will happily be corrected if anyone knows for sure - not something I have ever tried
|
|
|
Post by scootsmith on Oct 18, 2011 7:47:56 GMT
Hi ya, I posted a thread a while back re electronic flywheels and word was that any small taper flywheel will be ok?? Again if anyone knows different then let us know. Is it the stator that generates the 12v or the flywheel? Just a thought!
|
|
|
Post by swallow on Oct 20, 2011 7:16:33 GMT
|
|
|
Post by jonnysnatchsniffer on Oct 20, 2011 7:31:56 GMT
Hi ya, I posted a thread a while back re electronic flywheels and word was that any small taper flywheel will be ok?? Again if anyone knows different then let us know. Is it the stator that generates the 12v or the flywheel? Just a thought! it will work with any 6v electronic stator but wont work with any points stators except the 100 sport, the voltage is determined by the the windings on the stator and at the speed the flywheel turns, the thicker the wire and less turns is more power but less voltage and thinner the wire is more turns more voltage and less power
|
|
|
Post by swallow on Oct 25, 2011 13:36:21 GMT
Hi ya, I posted a thread a while back re electronic flywheels and word was that any small taper flywheel will be ok?? Again if anyone knows different then let us know. Is it the stator that generates the 12v or the flywheel? Just a thought! it will work with any 6v electronic stator but wont work with any points stators except the 100 sport, the voltage is determined by the the windings on the stator and at the speed the flywheel turns, the thicker the wire and less turns is more power but less voltage and thinner the wire is more turns more voltage and less power just seen this, sorry Scootsmith, didn't mean to ignore you but didn't know that it would work with a 6v stator. anyway - ending today on ebay, probably be a bargain
|
|
|
Post by eean on Oct 25, 2011 18:05:33 GMT
Yep def works, I have a lightened one that I ran before the vespatronic got fitted
|
|
|
Post by Spanish Rob on Oct 25, 2011 23:14:07 GMT
Aah feck - why didnt I see it was a 19mm flywheel
|
|
|
Post by scootsmith on Oct 26, 2011 7:51:49 GMT
No worries.
|
|