|
Post by bluebadge on Sept 15, 2011 7:25:37 GMT
Hey Mathias, check out these pics and let me know what ya think. There is a notch on the piston sidewall that only lets the bearing go so far. This notch keeps the bearing NEAR the center, but not completely. It seems like I shouldn't have any problems with it, but I may use a small (1mm spacer) just in case to keep it centered. Once again, I'll be happy to listen to your opinions or anyone elses. On the right is a standard 15x19x20 bearing. The left one is the 15x20x17.3 Wiseco bearing for the YZ125. This is the notch that keep the bearing off the inner piston sidewall. I have not checked, but I would imagine that it is common... Wiseco bearing as far as it will travel to one side... Standard bearing as far as it will travel to one side. Wiseco bearing centered. Wiseco. Wiseco. Wiseco as far to the left as possible. I believe the rod is fairly centered. I think even with the bearing all the way over, it's still good. I look forward to your opinion.
|
|