|
Post by breezer on Mar 18, 2012 16:40:09 GMT
part of a security grille?
|
|
|
Post by sugarlump on Mar 18, 2012 22:46:08 GMT
It's up on the wall now (can you believe I drilled the holes with uneven spacing and didn't notice till I was fixing it ). Clue: It's a space saver... Picture tomorrow
|
|
|
Post by sugarlump on Mar 19, 2012 13:31:37 GMT
It's for air tools innit. 10 quid for 10 pcl connectors on eBay, a few quid for the bsp nuts and unions welded to the angle iron. Idea was stolen from a seller who wants £80 for smaller versions of this! ;D
|
|
|
Post by ttscshaggy on Mar 19, 2012 16:26:57 GMT
I had a feeling it was some sort of Tool rack. kinda confused me with the tissue in the holes at first , then realised must be to keep the threads clean
|
|
|
Post by breezer on Mar 19, 2012 17:53:21 GMT
Nicking that!
Good work mate.
Easy to drop a bit of oil in as well!
|
|
|
Post by breezer on Mar 19, 2012 17:54:20 GMT
Presume it doesn't work quite so well with the parrafin gun?
;D
|
|
|
Post by sugarlump on Mar 19, 2012 20:10:14 GMT
Yeah, those paraffin guns practically leaks standing up ;D
The pcl connectors come as five male five female so I had to weld 5 nuts and 5 union connectors onto the angle, I'll email links to the products if that doesn't make sense...
|
|
|
Post by breezer on Mar 19, 2012 20:48:41 GMT
Sounds like graft mate, gonna just buy 2 x 5 males.
Might even just drill, feed threads through & nut on top.
£80 - daylight mate, daylight!
|
|
|
Post by sugarlump on Mar 19, 2012 21:24:22 GMT
Doh, didn't realize that seller does packs of five, I emailed and asked too but heard nothing back. Btw the bsp nuts are tapered so there might not be enough thread on the connector to pass through the angle first and still grip, just a thought...
|
|
|
Post by breezer on Mar 19, 2012 22:15:47 GMT
Bigger problem is that all my air tools are on the short type UNI couple or whatever they're called & there's no cheap multi deal on those - might be cheaper to change everything across to PCL
|
|