|
|
Post by darkryder on Mar 17, 2008 11:31:06 GMT
Does anyone know what cables must be jumped for a PK50XL2, there are 3 wires going to the ignition, and it looks like fr the "ON" position I have to "break" a circuit... any ideas? I guess it must be similar to the rest of PK50
|
|
|
|
Post by hank on Mar 17, 2008 11:41:04 GMT
you mean how to start the engine without the ignition? if so, pull out the green wire from the cdi.
|
|
|
|
Post by darkryder on Mar 17, 2008 12:04:56 GMT
I've got the engine on a stand and I need to start it, the cables that go to the ignition are disconected. So I just pull out the green one from the CDI, right?
|
|
|
|
Post by unreliablesc on Mar 17, 2008 12:33:42 GMT
I've got the engine on a stand and I need to start it, the cables that go to the ignition are disconected. So I just pull out the green one from the CDI, right? It should start if it's out of the frame. Try earthing the black wire if no joy. Make sure none of the 2 green wires are earthed. Is this the falc? |
|
|
|
Post by darkryder on Mar 17, 2008 13:48:48 GMT
I'll try this later this afternoon. Thanks guys.
Yep its the falc, after messing up buying the wrong crank, the exhaust a Polini Evo that has a smaller mouth to fit on the cylinder and some other small modifications its time to start it today!!
I dont know about the carburation do, will see...
|
|
