|
|
Post by gp200 on Jul 9, 2009 10:36:44 GMT
just got this today ,its a old ZETA kit from the 1980's    i remember these from the old "scooter scene" adds. will dig some of the old mags out and have a look all looks ok,the piston is 56mm |
|
|
|
Post by Juan on Jul 9, 2009 20:22:06 GMT
Not seen one of those.
On a related note I bought a Zeta marked 102 piston from Totally Scooters which was exactley the same as a DR or Olympia piston as were the 130 versions so I can only assume they made different models.
Anyway, the kit looks nice, let us know how she performs.
|
|
|
|
Post by OliMonster on Jul 9, 2009 20:46:27 GMT
Yeah, that's quite a few transfers right there... You're gonna have a fun time looking for pistons for that thing! Anyway, yeah, let us know how it runs, it looks like it could be quite nippy... ;D
|
|
|
|
Post by scooterslag on Jul 10, 2009 15:53:12 GMT
Like Juan said before- wouldn't a DR piston do the job?  |
|
|
|
Post by OliMonster on Jul 10, 2009 16:08:35 GMT
I'm not so sure, with the little circular holes cut into it jut below the rings... Never seen that before! I could, of course, be being a complete goon, so ignore anything I say!
On the bottom picture, I see a lip at the top of the bore... Is that serving any particular purpose, or is that just a piston ring or two stuck in there for safe keeping? ;D
|
|
|
|
Post by Juan on Jul 10, 2009 20:32:51 GMT
Like Juan said before- wouldn't a DR piston do the job? No Paul, not on that. Possibley with modification but I'd need to see the other side. As I said I think they must've made different 130's, the piston I saw at Totally was a straight DR 130. The 102 one I got off them was exactly the same as the DR unit bar it had wire pin clips and not the shite pressed type. |
|
|
|
Post by jonnysnatchsniffer on Jul 11, 2009 6:51:52 GMT
he has a piston there its in the second picture |
|
|
|
Post by Juan on Jul 12, 2009 8:34:13 GMT
I noticed. ;D
|
|
|
|
Post by MiNiKiN on Jul 13, 2009 10:32:16 GMT
looks a bit like the first (crap) Zirris - even the Pistons have the same additional holes.
Any clues what the timings of this kit are?
|
|
|
|
Post by tony on Jul 14, 2009 1:01:46 GMT
werent all the zirri kits crap marcus? ;D
|
|
|
|
Post by MiNiKiN on Jul 14, 2009 8:46:42 GMT
too true - looked a bit like cast in little angelos sandpit
|
|
|
|
Post by tony on Jul 14, 2009 12:47:28 GMT
and baked under his armpit ;D
|
|
|
|
Post by MiNiKiN on Jul 14, 2009 13:46:13 GMT
*ROFL*
thanks Tony, I now never gonna touch a Zirri again
|
|
|
|
Post by madmax on Jul 14, 2009 14:45:51 GMT
looks a bit like the first (crap) Zirris - even the Pistons have the same additional holes. Maybe the zeta stands for zirri?  How about that eh? ;D |
|
|
|
Post by Juan on Jul 14, 2009 21:12:31 GMT
werent all the zirri kits crap marcus? ;D Yeah, but I thought the M1L 2009 looked alright? The old ones may well have been shit but they sounded awesome. ;D |
|
How about that eh? ;D