doudz
Automatica
Posts: 3
|
Post by doudz on Apr 3, 2023 10:52:16 GMT
Hello I'm Edouard and primavera et3 owner in Tokyo.
I'm rebuilding my engine and need to take off my clutch
I bought a special extractor tool but it doesn't work.
Someone can help me and explain how can I take it off without special tool please?
thanks
|
|
|
Post by gugne on Apr 4, 2023 8:26:46 GMT
You can't take it off without the extractor. If you have it you must be using it incorrectly or it might be the wrong one. Anyway. Here's a video. It's in Italian but you should get some idea.
|
|
doudz
Automatica
Posts: 3
|
Post by doudz on Apr 8, 2023 2:27:27 GMT
Thanks for your reply. I bought an extractor for ET3 clutch 26X1
But impossible to put it inside my clutch…
|
|
doudz
Automatica
Posts: 3
|
Post by doudz on Apr 8, 2023 2:27:47 GMT
Thanks for your reply. I bought an extractor for ET3 clutch 26X1
But impossible to put it inside my clutch…
|
|
|
Post by gugne on Apr 8, 2023 8:24:42 GMT
That should be the correct one for it. Post some photos of how it won't fit.
|
|
|
Post by jonnysnatchsniffer on May 1, 2023 9:39:55 GMT
you need to take the nut and tab washer off from the centre of the clutch or the threaded part of puller will not fit the threaded part of the spider in that hole even if it did thread od you still need the nut off
|
|