|
Post by jonnysnatchsniffer on Aug 15, 2022 23:34:04 GMT
ok so my vespatronic flywheel has shat itself, 2 of the magnets have broken badly due to a twist in the crank that made the flywheel magnets hit the stator, are there other makes that use the same stator as vespatronic kit as yet, i dont know if the stator is fucked till i try a new wheel, so whats out there thats good?
|
|
|
Post by henri on Aug 16, 2022 6:26:26 GMT
the vespatronic uses IDM components , same as malossi/polini an VMC , the stators actually a morini 79mm dia one ,stick morini stator into ebay an they all pop up . the pinasco also use IDM components ,but the later 84mm morini stator .if your sticking with the 4 pole ignition systems VMC do a nice billet fly an ali fan set up .but not as light as your wanting i think , pinasco do a 800g set up and a 1100g one .all the rest are 1400-1500g .H
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 16, 2022 7:36:43 GMT
the vespatronic uses IDM components , same as malossi/polini an VMC , the stators actually a morini 79mm dia one ,stick morini stator into ebay an they all pop up . the pinasco also use IDM components ,but the later 84mm morini stator .if your sticking with the 4 pole ignition systems VMC do a nice billet fly an ali fan set up .but not as light as your wanting i think , pinasco do a 800g set up and a 1100g one .all the rest are 1400-1500g .H I could listen to you all day 👍😂
|
|
|
Post by jonnysnatchsniffer on Aug 18, 2022 16:19:47 GMT
so then, does the morini flywheel have the same taper as the vespa 20mm?
|
|