Light Surround fitting

[mark]

In the words of the Specials it’s “ Too Hot “

As per following Pictures rear light unit fell off .

It looks like it some long wood screws holding it in , trouble is being a bit thick I don’t know what the bits called that screws go in to like a bush type thing.

3 holes with no “ bush “ 1 with a mangled one in place.

[mark]

[tzsteve]

That looks like a threaded insert.
Often called rivnuts or nutserts.
They are cheap the tool is about £15 to £20 on fleabay,
They can be fitted using a nut with a bolt and a spanner videos on youtube

I use one to hold my seat lock pin in place

[kev]

If the light unit is held on by screws it will be this type of plastic insert www.accu.co.uk/nylon-grommet-nuts/504446-HGN-3-5-6-0-N?uk_google_shopping=1&c=3&gclid=Cj0KCQjwl92XBhC7ARIsAHLl9anuH22KGQuT9KT12ODy-olF9TLLUTtevKfxNP1xTMtuA3X4gU6jD8caAhdnEALw_wcB

You’ll need to measure the hole and buy the correct size plastic insert .

[mark]

The rivnuts look better but a bit more expensive than the Grommets.
Ordered the nylon grommets from link Tuesday afternoon and they arrived next day !!

Spot on and fit perfectly , thanks all :-)