|
|
Post by panicbtn on Jun 26, 2022 22:26:47 GMT
Just like the title says. I got a DR 130 with the stock carb and a leo Vince pipe. I've been told to get a 24mm carb. Any suggestions on which one? Do i need a new manifold? Any advice and suggestions is always appreciated. I also heard I should re gear it? Thanks in advance.
|
|
Yoshi
100 Sport
Posts: 75 
|
Post by Yoshi on Jun 27, 2022 5:50:22 GMT
Have you got a CDI ignition yet or are you still running original points ignition? This is the upgrade you should get first.
As for the carb, Polini intake 215.0002 with PHBL 24 AS (clamp mount) is a neat choice if you are going to rock the rotary valve. To get the most out of this, you should open up the intake port a bit and possibly add some intake time by cutting the crank.
As long as you keep the snail exhaust, you are good with stock gearing. If you go for an exhaust with power higher up in the RPM range, you will need a shorter primary gearing.
|
|
|
|
Post by jbcollier on Jun 28, 2022 3:44:03 GMT
"I have been told to get a 24mm carb."
Why? Is there an issue?
|
|
