|
|
Post by thegreenmachine on Jan 15, 2017 16:42:41 GMT
My cases are back together but I can't move the crank with the con-rod, I can with a spanner on the flywheel nut though it's stiff.
Any help appreciated.
|
|
|
|
Post by thegreenmachine on Jan 15, 2017 16:45:37 GMT
Just given the crank a few taps from the fly side with a rubber mallet, it has improved it....
|
|
|
|
Post by tzsteve on Jan 15, 2017 20:10:55 GMT
oil seal all the way in?
|
|
|
|
Post by thegreenmachine on Jan 15, 2017 22:26:22 GMT
Hmm....that's a thought...
|
|
|
|
Post by thegreenmachine on Jan 16, 2017 21:45:45 GMT
Well the oil seal was seated properly, I think I just need to centre the crank, a couple of taps with the rubber mallet definitely freed it up, but I was running out of daytime, so it'll have to wait until I can play again next week.
|
|
tony8834
50 Special
many a Vespa problem is caused by the nut that connects the handlebars to the saddle!
Posts: 27
|
Post by tony8834 on Apr 10, 2019 9:07:17 GMT
How did you get on with this, have you solved it as i am having the same trouble with my rebuild
|
|
|
|
Post by tzsteve on Apr 10, 2019 16:35:56 GMT
the rubber mallet seems to be the tool of choice
|
|
