|
Post by philcee on Sept 10, 2015 19:45:26 GMT
Hi, Just joined the forum and finding it very informative. Ive just purchased a 1967 Vespa 50s, everything standard. Have always had PX's but fancied a change, the last PX I had i de-restricted it, popped a Sip road 2 exhaust on and up jetted to suit and what a difference it made. Don't want to go down the route as putting a kit on the 50s just yet, so I'm thinking putting one of these on : Sip Chrome , and upjet. Any suggestions for jet etc ? Any other recommendations ?
|
|
|
Post by henri on Sept 11, 2015 6:25:05 GMT
hi n welcome mate ,sorry ya link dont work , ask again in tech section you'll prob get more answers , 2 things , 1 chrome pipes are loud ,no packing as it wont survive chroming ,so if ya use scoot early/late you better have nice neighbours . 2, the chrome dont last 6 months ,my local scoot shop wont sell road2's in chrome no more as so many complained n tried to get refunds . H
|
|
|
Post by philcee on Sept 11, 2015 19:47:50 GMT
|
|
|
Post by nick121170 on Sept 11, 2015 22:49:37 GMT
complete waste of time putting an exhaust / up jetting on a 50 engine to gain another 5mph if you are lucky better off saving up and upgrading to 125/135 etc kits
|
|
|
Post by philcee on Sept 13, 2015 22:15:50 GMT
Fair do's Nick, cheers, Sip kit it will be then :-)
|
|
|
Post by philcee on Oct 17, 2015 16:59:41 GMT
Been looking at the Pinasco 102: Pinasco 102
As Sip say its a bolt on kit, reading the blurb it says about altering the gearing which is something which i don't want or have the knowledge to do. Could I fit the kit without messing with the gearing ? And putting the Sip Banana exhaust on: Banana
And lastly a 19/19 Carb, 12v conversion and i think that will do for now. Any advice ?
|
|