pigsy
50 Special
Posts: 44
|
Post by pigsy on Mar 1, 2015 17:23:53 GMT
Hi all, i am fairly new to all this so please bare with me. Just picked this up this morning. Will load pics when i figure out how to. Going to use as a commuter to and from work (20 mile round trip), max 50mph limit. Has missing piston and rings and someone has dropped bolts in the bottom by the looks of it, so need to strip down remove check etc. Cant seem to find exploded diagram of engine. So any help would be appreciated. Thanks
|
|
|
Post by Juan on Mar 1, 2015 18:33:09 GMT
This could be a start for you but also check out Scooterhelp and smallframes.com technical sections.
|
|
pigsy
50 Special
Posts: 44
|
Post by pigsy on Mar 1, 2015 18:54:48 GMT
Ok, many thanks.
|
|
pigsy
50 Special
Posts: 44
|
Post by pigsy on Mar 1, 2015 19:33:31 GMT
I might be way off, but does the v90 engine brake down the same, just difference sizes. Also what kit do people recommend for 135 and is a simple bolt on.
|
|
|
Post by triffid on Mar 2, 2015 16:48:39 GMT
If you want to keep it pretty standard then the DR kit is the one to go for, they were on flea bay really cheap recently, check the e-bay thread for details.
|
|
pigsy
50 Special
Posts: 44
|
Post by pigsy on Mar 2, 2015 19:28:24 GMT
Have been looking at those. Many thanks for your help.
|
|
pigsy
50 Special
Posts: 44
|
Post by pigsy on Mar 2, 2015 19:40:12 GMT
DR kit on the way, thanks.
|
|
|
Post by SpoonTuning on Mar 2, 2015 22:10:48 GMT
Theres a thread on here on how to upload pics that might help you, is it the red one of facebook by any chance?
|
|
pigsy
50 Special
Posts: 44
|
Post by pigsy on Mar 4, 2015 21:47:59 GMT
|
|
|
Post by SpoonTuning on Mar 4, 2015 22:14:50 GMT
That's the one, seemed a fair price for what it was, look forward to seeing more pics
|
|
pigsy
50 Special
Posts: 44
|
Post by pigsy on Mar 4, 2015 22:31:32 GMT
Got it off eBay, give £475. Not to sure what he had it up for on facebook. Will upload more pics as i go along.
|
|
|
Post by tzsteve on Mar 5, 2015 15:31:33 GMT
not a bad price
|
|
|
Post by SpoonTuning on Mar 5, 2015 16:33:40 GMT
Not a bad price at all, think he wanted 600 for it
|
|
pigsy
50 Special
Posts: 44
|
Post by pigsy on Mar 5, 2015 20:03:33 GMT
That's what he wanted for it on ebay, but i managed to knock him down. Just going to give it a bit of a clean up fit the dr kit a sports exhaust,look into gearing and carb, mot it and just get it on the road for now.
|
|
pigsy
50 Special
Posts: 44
|
Post by pigsy on Mar 6, 2015 22:32:56 GMT
Anyone recommend any thing for gearing and carb to get a bit more top end. Also insurance company's. Thanks.
|
|
pigsy
50 Special
Posts: 44
|
Post by pigsy on Mar 14, 2015 22:46:44 GMT
|
|
pigsy
50 Special
Posts: 44
|
Post by pigsy on Mar 15, 2015 21:16:04 GMT
When purchased, the clutch cover was off and there was crap and even a couple bolts and washers sitting in the casing. Today I got the casings apart to find another bolt and couple of washers inside, but on the upside no damage and found it to have 4 gear setup. s1301.photobucket.com/user/pigsy13/media/temporary_zps835e4da6.jpg.html?o=0#This my first time stripping a engine, so it's new to me. But I am really enjoying it.
|
|