gaz72
100 Sport
Posts: 94
|
Post by gaz72 on Nov 23, 2011 13:54:21 GMT
wanted pk 100 piston kit
looking for a stock size or 1st oversize piston
Any exhaust but standard preferred
pm please
|
|
|
|
Post by scooteristforever on Nov 23, 2011 22:43:33 GMT
Hows things Gary, do you have a contact for " Bridlington Jamie".. he has a standard pipe with about 15 miles of use on it... will PM you his numbers if you need em.....  cheers Col |
|
gaz72
100 Sport
Posts: 94
|
Post by gaz72 on Nov 24, 2011 20:22:20 GMT
cheers Col
that would be great
just collecting bits for a little project bike
gary
|
|
|
|
Post by Perkin on Nov 24, 2011 21:31:10 GMT
Is a PK100 piston the same as a V100?
I have a brand new 2nd O/S...
|
|
gaz72
100 Sport
Posts: 94
|
Post by gaz72 on Nov 26, 2011 16:53:55 GMT
gnomo
good question - i`m not completely sure they are the same size stroke, rod legth and wrist pin size.
what size is it ?
does it have the dykes top ring?
how much posted?
col
could you pm jamies number
gaz
|
|
|
|
Post by Perkin on Nov 26, 2011 18:17:18 GMT
gnomo good question - i`m not completely sure they are the same size stroke, rod legth and wrist pin size. what size is it ? does it have the dykes top ring? how much posted? Will check that stuff & report back... |
|
|
|
Post by jonnysnatchsniffer on Nov 26, 2011 19:28:33 GMT
pk is 3 port, so if the v100 piston is used you will have to cut a window in it
|
|
|
|
Post by vesparep1 on Nov 26, 2011 19:34:26 GMT
pk is 3 port, so if the v100 piston is used you will have to cut a window in it james sometimes........ you are a cleaver cunt ;D ;D ;D hope that fucking foot, ankle , has stopped iching................ ;D still love ya mate |
|
gaz72
100 Sport
Posts: 94
|
Post by gaz72 on Nov 27, 2011 17:10:28 GMT
thanks for the replies and info
|
|
|
|
Post by jonnysnatchsniffer on Nov 28, 2011 18:46:02 GMT
love you too russ  |
|
|
|
Post by 225worb on Nov 28, 2011 18:55:01 GMT
pk is 3 port, so if the v100 piston is used you will have to cut a window in it OOOH Johnny...i had a v100 top end on an engine i built years ago and that was a 3 port but not of a pk engine!!!..i took it off of me mates 3 speed v100...it use to be a reeeeet ripper |
|
