|
|
Post by dannyrens on Nov 20, 2011 15:47:23 GMT
PK switches, both indicator and lightswitch £25 posted for both, £15 posted individual  PK Seats, Uncovered *SOLD* £25 Posted, seat without cover £25 posted (cover now sold) PK stand £10 posted, Kickstart £7 (Sold), seat catch £5 (Sold)  Dell'orto 16/16 Carb with 2 stud inlet manifold (manifold sold),open to offers  19 small taper crank £20 posted  and finally 24mm MALOSSI inlet manifold with reed valve block, hardly used. its the case intake, rather than the direct inlet, will not work with full circle crank (lesson learned there  bought for £60, open to offers  |
|
|
|
Post by jase on Nov 20, 2011 16:30:04 GMT
Sent you a couple of pms mate
|
|
|
|
Post by dannyrens on Nov 20, 2011 16:44:18 GMT
uncovered seat, flywheel and stator now sold.
|
|
|
|
Post by swallow on Nov 20, 2011 17:38:32 GMT
does the pk stand come with the brackets?
|
|
|
|
Post by dannyrens on Nov 20, 2011 17:46:56 GMT
does the pk stand come with the brackets? nope, used them with the new stand |
|
|
|
Post by breezer on Nov 20, 2011 17:53:26 GMT
Is the crank for a 50 or larger capacity engine?
Jim
|
|
|
|
Post by stewart on Nov 20, 2011 18:01:13 GMT
Is the seat cover in decent condition? Will you sell it seperately?  |
|
|
|
Post by dannyrens on Nov 20, 2011 18:27:10 GMT
Is the crank for a 50 or larger capacity engine? Jim i think the previous set up had it working with a DR110 kit. i will measure stroke etc. tomorrow if you like. |
|
|
|
Post by dannyrens on Nov 20, 2011 18:28:58 GMT
Is the seat cover in decent condition? Will you sell it seperately? seat cover in very good nic, no tears or significant wear. would sell it seperately for £10 posted might even be able to throw in a couple of the clips that hold the leather to the seat. |
|
|
|
Post by breezer on Nov 20, 2011 19:10:43 GMT
That would make it short stroke (I think)
It's not for me, but anyone who's interested would need to know
Cheers
Jim
|
|
|
|
Post by dannyrens on Nov 21, 2011 11:54:10 GMT
i have now found the rubber and jubilee clips for the manifold, so those can be added into the package, all brand new
|
|
|
|
Post by jase on Nov 23, 2011 18:42:27 GMT
Parts came today mate ,spot on,many thanks
|
|
|
|
Post by dannyrens on Nov 24, 2011 14:32:28 GMT
any more takers before it gets ebay'd?
|
|
|
|
Post by charliec on Nov 24, 2011 16:50:17 GMT
the sealing pad has to be removed for the full cricle crank i think? that might have been why it wasnt working, but if the sealing pad was removed . pretty strange  |
|
|
|
Post by dannyrens on Nov 24, 2011 18:36:55 GMT
charlie, what carb are you using for your malossi PK?
|
|
|
|
Post by charliec on Nov 24, 2011 20:36:30 GMT
28mm Stage 6 pwk
but 24mm delorts are good i hear
|
|
|
|
Post by dannyrens on Nov 24, 2011 20:50:17 GMT
Ah i see, I'm running the delly 24mm, although I'm struggling to get the main jet right, it's 100 at the moment but bogging down at high revs, I think it's slighty too big. Can you offer any assistance? I don't know if the two carbs are comparable.
|
|
|
|
Post by dannyrens on Nov 25, 2011 17:18:45 GMT
cylinder kit, kickstart, seat catch and carb manifold have now been sold
|
|
|
|
Post by charliec on Nov 29, 2011 18:57:00 GMT
Ah i see, I'm running the delly 24mm, although I'm struggling to get the main jet right, it's 100 at the moment but bogging down at high revs, I think it's slighty too big. Can you offer any assistance? I don't know if the two carbs are comparable. try lower the main jet if you think thats what it needs - if you go onto mb developments you can get jet kits for pretty cheap i think |
|
bought for £60, open to offers
