|
Post by mikea565 on May 10, 2008 20:38:27 GMT
Ok so you can go up to 70% of bore , but on the malossi 136 (57.5 mm) , roughly in millimetres how much can each side be widened, someone on here must have done this already ?
|
|
|
Post by jonnysnatchsniffer on May 12, 2008 15:20:10 GMT
by my reckoning you can go to 40mm overall so measure it and see what you have already its measured as a staight line across the port and not round the bore in an arc
|
|