|
Post by willspeed on Apr 20, 2008 22:35:04 GMT
I'm thinking of fitting a new loom in my PK, its gone through a lot that little loom, dipped in acid loads of times, blasted, a two pack primer, two pack paint, and loads of lacquer. anyone got any tips on how to fit it ? please help
|
|
|
Post by ozoap on Apr 21, 2008 8:28:56 GMT
anyone got any tips on how to fit it ? Get someone else to do it. ;D Pain in the arse, but your lucky, there are a lot worse bikes than a PK to sling a loom into.
|
|
|
Post by willspeed on Apr 21, 2008 20:54:05 GMT
think I'm gonna tackle it ;D
Check list
1- new PKs loom 1- swear jar 1- unbreakable swear jar ( for when i run out of money and Chuck it across the garage) 1- big bag of money 1- CD player and lots of calming music
think thats about it.
|
|
|
Post by tony on Apr 21, 2008 22:16:41 GMT
Try this , run a nice clean inner cable down frame, solder the new loom to the cable. carefully pull up. easy..
|
|
|
Post by hank on Apr 21, 2008 22:28:43 GMT
good idea, but getting the indicator wires thro those little holes in the frame has always worried me ;D
|
|
|
Post by tony on Apr 21, 2008 22:29:45 GMT
nice smallframes dont have indicators!! ;D
|
|
|
Post by breezer on Apr 22, 2008 5:36:34 GMT
You do the same for those, and the horn one, and back brake.
Thread those wires through and pull on all 4 - the indicator wires should then pull through to the holes etc
|
|
|
Post by hank on Apr 22, 2008 15:49:54 GMT
yeah its dead easy
|
|
|
Post by tony on Apr 22, 2008 15:57:08 GMT
pay me petrol up an i'll come make you a loom and fit it! pessimist!! ;D
|
|
|
Post by breezer on Apr 22, 2008 21:59:53 GMT
Hank I'll go halves on the petrol with ya, PK needs one. ;D
|
|
|
Post by sweetpea on May 1, 2008 12:34:33 GMT
Absolute pig of a job.... i did mine recently, i found the hardest part was passing the wiring through the headstock and getting it so it doesn't catch on the handlebars when turning . The other parts such as rear lighting fuse box etc i found quite straight forward. SP
|
|
|
Post by tony on May 2, 2008 1:16:13 GMT
How i do it with home made loom on 6v to 12v thread
|
|