PK electrics

[pk80s]

My PK blows both front and rear left side indcator bulbs and back break light bulb every time i rev it up with the lights on. On tickover all electrics work ok. Ive tried a new regulator from Beedys and no joy, also got a new flasher unit and that didn't work eather.All soldering on switches is good too.It's a PK80S with a battery, can any body help please?

[Juan]

I'm even worse with electrics than mechanicals but it sounds like a bad earth to me.Check your earth and if it's good is it straight onto paint as that can hamper the charges path.

[tony]

are pk indicators on the reg circuit anyone? The brake light would be.. so i would check the output from the regulator when revving up mate.

[me]

The battery models normally ran the indicators through a DC flasher which is different to the AC type.

Not impossable to make it AC bit of rewiring needed.

Brake light normmaly off the regulator, is it a 4 or 5 connection regulator. Normal AC systems have the 3 like PX but on battery model the regs were different