|
Post by mikea565 on Apr 9, 2008 18:40:31 GMT
Carb set up 25phbl, malossi reed & no filter with AQ266, D26 2nd clip ,110 main & 45 pilot. Has anyone else got a similar setup in their 136. Is this in the ballpark or a little risky ?
|
|
|
Post by adspeed on Apr 9, 2008 20:42:30 GMT
What pipe ya using?
|
|
|
Post by mikea565 on Apr 10, 2008 14:17:58 GMT
zirri silent,. 2.56 & short 4th
|
|
|
Post by adspeed on Apr 13, 2008 14:59:17 GMT
This was direct reed with additional porting and Sim D&F Main 104 Atomiser AQ264 Needle D29P2 Pilot 50 and with Hammerzombie Main 110 Atomiser AQ266 Needle D29P3.5 Pilot 50
|
|
|
Post by mikea565 on Apr 13, 2008 18:56:32 GMT
Cheers, will give my D29 a go and see if the mid range clears up a bit ( he said in a hopeful manner).
|
|
|
Post by mikea565 on Apr 30, 2008 19:25:28 GMT
Ok i have now run motor in and have the following setup
Main 110 Atomiser AQ266 Needle D29P2 Pilot 55
Runs great up to about half throttle, smooth responsive and power band kicks in nicely. Anything over half throttle and it just ain't as responsive ( Lean ,as picks up when choke out) . Moved d29 to 3rd clip down and its rich as hell. D22,d26 & d36 (all tried on 2nd clip position) all tried but too rich at mid range.
Any ideas ?
|
|
|
Post by mikea565 on Jun 6, 2008 21:24:20 GMT
oh well hopefully the dyno run will pick up on this problem but would an AQ264 make much difference (waits patiently but anticipates no response ?
|
|