|
Post by dazrave on Apr 7, 2008 19:11:34 GMT
im in the process of putting my 50 spec with primmy with 12v convertion back together...
im about to wire the regulator... can someone advise me...
does the earth wire from the regulator go to the body or back to the junction box 'black' ??
cheers DAZ
|
|
|
Post by zuppashprint on Apr 8, 2008 4:17:07 GMT
It goes to the body...usually one of the fixing screws for the regulator. Make sure it's a good earth...paint is not good earth...you will get intermittent lights and eventually fry the regulator.
The black in the junction should be a connection between the stator and the main frame loom....which should go to the main frame earth...which in most cases is (on a standard loom) a mess of black wires soldered together and taped up but all leading to one earth point....usually the regulator fixing screw.
Sorry if I was a bit redundant in my info.
|
|