|
|
Post by Jumbo-LBCSC on Apr 6, 2008 2:23:37 GMT
Installing it on a 1980 Euro primavera (no battery) Anyway... Can someone reply on a how to wire it up in lament terms? I'm a bit confused? Thanks, -Jumbo
|
|
|
|
Post by Juan on Apr 6, 2008 8:46:42 GMT
I'm pretty sure it's the same as the Vespatronic and someone on here has scanned the instructions but I can't remember who it was or where.
|
|
|
|
Post by unreliablesc on Apr 6, 2008 17:49:20 GMT
If its the same as the Vethpatronic:
Yellow/white is AC feed. Both this and 12V to your loom goes to same tab on regulator. Earth the regulator tab underneath/over the AC on regulator.
Red/black goes to the tab closest to plug-wire on the coil, you kill wire is connected to the same tab.
Blue goes to 2nd tab on the coil.
Just forget about the 4th wire.
I hope this helps.
If you need it I can e-mail you the diagrams.
|
|
|
|
Post by Jumbo-LBCSC on Apr 7, 2008 6:57:00 GMT
Got it running ...Sounds good. But no tail light, or speedo light... only brake ,headlight hi/lo, and horn, Did what the Parma instuctions said ?... Anyone on here hook up a Parmakit variatronic to a Euro Primmy? If so... can you tell me exactly how you did it??? Thanks, Jumbo  |
|
|
|
Post by Jumbo-LBCSC on Apr 11, 2008 4:48:23 GMT
Update: Jumped the speedo wire to the head light split the yellow wire and tied it into the light circuit on the reg. to get tail light... Now everythings working!  |
|
