|
|
Post by jake on Apr 5, 2008 20:22:49 GMT
when using a full circle crank on a parma are they all 20/20 or is there one to suit large taper xl casings
|
|
|
|
Post by smallyshane on Apr 5, 2008 20:37:35 GMT
|
|
|
|
Post by Juan on Apr 5, 2008 21:17:27 GMT
That's a standard crank Shane. Had a look on SIP and I saw 2, both were 54mm strokers though. I did find this.I'll not pretend to understand the full circle v special lip arguement too well but it's worth consideration. I've also noted a few more expensive items from Grand Sport and the like. |
|
|
|
Post by smallyshane on Apr 5, 2008 21:27:02 GMT
So it is.... I had a few links open, just copied the wrong one  |
|
|
|
Post by mikea565 on Apr 5, 2008 21:28:01 GMT
I've got one of the above worb 5 XL ones in my motor. Don't know how it is yet as only just starting to run it in but its competitively priced and comes with a nicely polished conrod and mine came with a higher quality big end bearing.
|
|
|
|
Post by jake on Apr 5, 2008 21:47:13 GMT
are you running it with a parma.what i want to know is if you are fitting a parma is there any advantages in which casings you use or does it not matter
|
|
|
|
Post by adspeed on Apr 5, 2008 22:22:37 GMT
Doesn't really matter, my Parma is with V90 casings......Maz full circle crank, no problems
|
|
|
|
Post by jake on Apr 5, 2008 22:45:42 GMT
is that the 20/20
|
|
