|
|
Post by atufte on Jan 28, 2007 20:29:16 GMT
It's been through some fases already...the first picture was how it looked when i first got it, and the progress will keep going until the supposed "finished deadline" in early may 2007... I will update the gallery when there is some progress... www.alexandertufte.com/vespaproject/ |
|
|
|
Post by Juan on Jan 28, 2007 21:19:07 GMT
Quite a few arty shots in there Alex,bit of a photographer in you spare time eh?  |
|
|
|
Post by atufte on Jan 28, 2007 21:31:13 GMT
Hehe, no photographer full time....that's my occupation!
|
|
|
|
Post by atufte on Jan 28, 2007 21:40:10 GMT
The project will include:
PK front fork with Grimeca Hydraulic Disk break (not semi) and Garelli carbon front "hugger"
fender, PK 125 engine with HP4/Polini 130/Polini Airfilter/Dellorto 19/19/PV Handlebar with breakfluid case mod/complete 12V electrics, 99.7% raw ALU paint job for body, and rest of ALU
parts kept in raw ALU state, Malossi RS24 and so on...
|
|
|
|
Post by mikea565 on Feb 2, 2007 18:38:04 GMT
can't seem to get any link to pics up guys  |
|
|
|
Post by Juan on Feb 3, 2007 0:13:31 GMT
Works fine for me Mike,perhaps it's your browser settings?
|
|
|
|
Post by atufte on Mar 21, 2007 22:01:14 GMT
|
|
|
|
Post by novista on Mar 22, 2007 11:53:14 GMT
Looking good!
Anychance you could pm me the specs for that engine frame?
|
|
|
|
Post by hank on Mar 22, 2007 15:52:07 GMT
very nice,  think i'll paint my flywheel red couple of questions: front shock spring - looks strange - is it meant to be like that? front hugger mudguard - presume the Garelli from sip, is that the standard bracket or did you make one? |
|
|
|
Post by atufte on Mar 22, 2007 20:16:38 GMT
Looking good! Anychance you could pm me the specs for that engine frame? Sandblasted and spray painted with 99.8% alu on engine block 1 and same prosedure on block 2 but with red engine spraypaint on this side, i think it look's cool and a bit different than usual... :-) |
|
|
|
Post by atufte on Mar 22, 2007 20:21:33 GMT
very nice, think i'll paint my flywheel red couple of questions: front shock spring - looks strange - is it meant to be like that? front hugger mudguard - presume the Garelli from sip, is that the standard bracket or did you make one? Front Shock is a "color modified only" Malossi RS 24 and the front mudguard is the Carbon hugger from Garelli, the bracket is custom made, and look's way better than the "stock" bracket... :-) |
|
|
|
Post by unreliablesc on Mar 22, 2007 20:27:03 GMT
Nice Alex.
Did you figure out which engine you have?
I presume I will see your scoot live in June?
|
|
|
|
Post by atufte on Mar 22, 2007 21:45:24 GMT
Nice Alex. Did you figure out which engine you have? I presume I will see your scoot live in June? Yep, after a lot of "back and forth" i got the donor scoot info and called the the vehicle registration office and got the info, but anyway thaks for your effort to help me... Takk And yes i will see you and hopefully your scoot at th 10'th Classic Scooter Run :-) |
|
|
|
Post by atufte on Mar 22, 2007 23:03:38 GMT
|
|
|
|
Post by novista on Mar 23, 2007 10:43:46 GMT
Looking good! Anychance you could pm me the specs for that engine frame? Sandblasted and spray painted with 99.8% alu on engine block 1 and same prosedure on block 2 but with red engine spraypaint on this side, i think it look's cool and a bit different than usual... :-) Funnily enough that was a question i was going to ask, i really like the ally look, but not the one is was after.  I'll explain better, i was after the specs for the wooden engine frame. ;D |
|
|
|
Post by atufte on Mar 24, 2007 11:47:21 GMT
Sandblasted and spray painted with 99.8% alu on engine block 1 and same prosedure on block 2 but with red engine spraypaint on this side, i think it look's cool and a bit different than usual... :-) Funnily enough that was a question i was going to ask, i really like the ally look, but not the one is was after. I'll explain better, i was after the specs for the wooden engine frame. ;D Ok, i will measure it and give you the directions when i'm at work monday (that's where it is...) |
|
|
|
Post by novista on Mar 26, 2007 9:53:11 GMT
Funnily enough that was a question i was going to ask, i really like the ally look, but not the one is was after. I'll explain better, i was after the specs for the wooden engine frame. ;D Ok, i will measure it and give you the directions when i'm at work monday (that's where it is...) Cheers Alex. |
|
|
|
Post by atufte on Mar 30, 2007 21:04:11 GMT
|
|
|
|
Post by atufte on Mar 30, 2007 21:53:20 GMT
Progress... :-)  |
|
|
|
Post by novista on Apr 2, 2007 10:08:37 GMT
Nice one alex! Cheers for that!!! |
|
think i'll paint my flywheel red
