|
Post by mark on Apr 29, 2009 17:32:11 GMT
Can you put a 350 be ten on a primmy at the back or is it to wide, would i need to change the front from 300 to 350 or would it be alright left as it is, cheers .
|
|
|
Post by madmax on Apr 29, 2009 18:53:32 GMT
Might rub on the shock, you would be better off replacing it with a PK one. The primmy shock is tapered in the middle (fatter), the Pk one is straight. Check the exhaust manifold for clearance.
Also, you should fit one to the front too as it will ride better.
|
|
|
Post by tony on Apr 30, 2009 1:21:36 GMT
The 3.50 tends to rub on the motor case on the 'diagonal'. How much depends on the make of tyre. Leaving the smaller one on the front will speed up the steering which you may or may not like. Solution to rear is to space the rim off the hub a little and/or grind the case away a little. Use the truest rim you can find.
|
|
|
Post by madmax on Apr 30, 2009 16:26:55 GMT
The 3.50 tends to rub on the motor case on the 'diagonal'. How much depends on the make of tyre. Yes, forgot about that (cheers Tony ;D). Mine was rubbing a little on the exhaust bolt too.
|
|